Portable Carbon Monoxide Detector for Hotels

$129 | Designed & Made in the USA.

Carbon monoxide has become a top of mind issue for hotel managers everywhere. The Sensorcon CO Inspector is a compact, durable and wearable CO monitor that will give you advanced warning to potential carbon monoxide issues in your hotel.

At $129, it's easy to equip all of your maintenance staffs with this device. And be sure to see our Volume Pricing page for 5+ unit deployments.

Add to cart

What are the Carbon Monoxide Alarm Points on the Inspector?

Our portable CO monitor will alarm at 35 PPM on a low point, and 200 PPM on a high.

How often does my Handheld Carbon Monoxide Detector need calibration?

For the Sensorcon Inspector, we recommend every 180 days. However, this also depends on how precise you need your readings to be. If you intend to use it simply to let you know about potentially dangerous carbon monoxide levels, an annual or semi-annual calibration should suffice.

Day 0: +/- 10%
Day 180: +/- 20%
1 year: +/- 30%
2 year: +/- 40%
3 year: +/- 60%

So after 2 years without calibration, the 35 PPM threshold would register somewhere between 25 PPM and 45 PPM. In both cases, further investigation is warranted.

Resolution 1ppm
Accuracy +/- 10% of reading or +/- 2ppm (whichever is higher)
Initial response time 5 Seconds
Full response time 20 Seconds
Size ~3.2″ x 2.2″ x 0.9″
Battery Life >2 yrs (without alarms on)
Battery Type CR123A (Panasonic CR123A required for Industrial version)
Alarm setpoints 35 ppm low, 200 ppm high
Alarm types Visual LCD/LED, Audible Buzzer (80-85dB), and Vibrate Mode (vibrate in Industrial models only)
Temperature Range -4 to +122 °F (-20 to +50 °C)
Humidity Range 20%-90% RH continuous (0-99% intermittent, e.g.
Sensor Type Amperometric type electrochemical sensor
Ingress Rating IP 67 (completely dust proof & water proof)
Wearability Steel alligator clip with lanyard loop